Welcome to the Nordic Wave community! We’re excited for you to start your journey with the Gen1 Viking. Setup is simple and should take no more than 30–45 minutes. Below is everything you need to know to get your plunge up and running. For a full wal
To keep your Viking Gen1 system running efficiently and ensure clean, safe plunges, monthly maintenance is essential. This quick process will extend the life of your chiller and keep your water crystal clear. Replace the Water Filter (on the back of
If your Viking Gen1 Chiller is displaying a red light, this means the unit has entered protection mode due to low water flow. The red light is a built-in safety feature that shuts the chiller off to prevent damage. Dirty Water Filter (on the back of
1. Draining the Viking. Unplug the chiller before starting any maintenance. Close both grey valves on the Viking to stop water flow. Attach a garden hose to the bottom drain valve for easy draining. Open the drain valve and allow the water to fully e
To ensure the longevity and proper functioning of your Gen1 chiller, it is essential to follow these winterization steps when ambient temperatures approach or drop below 32°F (0°C):. Unplug the Chiller: Always disconnect the power to your chiller bef