How to Properly Install the Viking Gen 1 - Standard and Elite Set UpUpdated a month ago

VIKING GEN 1 STANDARD COLD PLUNGE SETUP

Please watch the following video to learn how to properly install the Viking Gen 1:

VIKING GEN 1 ELITE COLD PLUNGE SETUP

As of now, we do not have an installation video specific to the Viking Gen 1 Elite Chiller setup, however please reference the video above for most of the setup. The main difference being that you will not have a bottom drain valve. Instead, a third hose will connect to this port and connect to the bottom port of the chiller. 

There will be 3 hoses all that connect the Viking to the chiller. Please ensure that all hoses match up to the same port -
top to top
middle to middle
bottom to bottom

The hose with the inline hose strainer will go on the bottom ports, with the arrow pointing towards the chiller.

A white garden hose adaptor will also be included in this order. This will look similar to the 6 black hose adaptors you received. The white adaptor can be used when draining the tub by disconnecting the bottom hose from the chiller, connecting the hose to the side of the adaptor with the O-ring and connecting a garden hose to the other end with the grooves. This will drain the water inside the tub away from the system.